2025 SANY® Backhoe Loader SLB95

Current SANY® Construction-Equipment Backhoe Loader

Swipe to View More

Year 2025
Make SANY®
Model Backhoe Loader

Year 2025
Manufacturer SANY®
Model Name Backhoe Loader
Trim Name SLB95
Generic Type (Primary) General
Engine Manufacturer Deutz TCD3.6-L4 - Low Maintenance T4F
Displacement 3.6 L (220 in³)
Engine Power Gross: 73.8 kW @ 2,200 rpm (99 hp @ 2,200 rpm) | Net: 70.8 kW @ 2,200 rpm (95 hp @ 2,200 rpm) | Hydraulic: 39 kW @ 2,200 rpm (52.3 hp @ 2,200 rpm)
Engine Torque, Maximum 410 Nm @ 1,600 rpm (302.4 lbs-ft @ 1,600 rpm)

Meet your Money-Maker. SANY’s backhoe loader is agile and simple to operate. We’ve lowered the learning curve so anyone on your crew can hop in and get to work. Operators have the advantage of multipurpose performance with greater versatility and maneuverability. They can also service the machine with ease and move from site to site without the use of a trailer. Plus, this backhoe loader comes loaded with standard features. That’s time and money back in your pocket.

Features may include:

4WD Powershift Transmission with Limited Slip Differential

Load Sensing Hydraulic with Pilot Controls

Boom Float and Return-to-Dig Standard

Flip-over Pads and Outrigger Cylinder Guards

Standard Breaker Line and ISO/SAE Pattern Change

8 Working LED Lights Plus Traffic Lights

Air Suspension Seats with 3'' Retractable Seatbelt

AM/FM Bluetooth Radio (cab model only)

ROPS/FOPS Certified for earthmoving and agriculture

Engine

Engine Manufacturer Deutz TCD3.6-L4 - Low Maintenance T4F

Displacement 3.6 L (220 in³)

Engine Power Gross: 73.8 kW @ 2,200 rpm (99 hp @ 2,200 rpm) | Net: 70.8 kW @ 2,200 rpm (95 hp @ 2,200 rpm) | Hydraulic: 39 kW @ 2,200 rpm (52.3 hp @ 2,200 rpm)

Engine Torque, Maximum 410 Nm @ 1,600 rpm (302.4 lbs-ft @ 1,600 rpm)

Drivetrain

Transmission ZF 4WD — 4 Speed Forward/Reverse

Gears Speed Gear 1: 4.8 km/hr (3 mph) | Speed Gear 2: 9.6 km/hr (6 mph) | Speed Gear 3: 19.3 km/hr (12 mph) | Speed Gear 4: 35.4 km/hr (22 mph)

Pump Type Kawasaki Variable Displacement—Axial Piston

Hydraulics

Hydraulic Type Load Sensing with Pilot Controls

Hydraulic Flow System: 156 l/min (41.2 gal/min) | One-way Aux Line Max Flow: 79.4 l/min (21 gal/min)

Operational

Maximum Pressure 24.9 MPa (3,625 psi) | One-way Aux Line Max Pressure: 14.5 MPa 2,103 psi

Operating Conditions Bucket Breakout Force—Excavator: 55 kN (12,354 lbf) | Bucket Breakout Force—Loader: 50 kN (11,240 lbf)

Dimensions

Transport Length 7,381 mm (24' 3")

Transport Width 2,280 mm (7' 6")

Transport Height 3,732 mm (12' 3")

Height Cab: 3,129 mm (10' 3") | Maximum Digging: 5,370 mm (17' 7") | Maximum Height to Bucket Hinge Pin: 3,478 mm (11' 5") | Maximum Operating: 4,293 mm (14' 1")

Ground Clearance Minimum: 320 mm (1' 1")

Length From Axle to Axle: 2,245 mm (7' 4")

Wheelbase Rear: 1,780 mm (5' 10")

Turning Radius Front Tires: 4,240 mm (13' 11") | Front Bucket: 4,800 mm (15' 9")

Overall Width Stabilizer: 3,491 mm (11' 5")

Dimensions Maximum Reach from Center of Swing Pivot: 5,671 mm (18' 7") | Dump Clearance: 2,700 mm (8' 10") | Reach at Dump Position: 730 mm (2' 5") | Bucket Rollback Angle @ Ground Level: 40º | Bucket Rollback Angle @ Full Height: 51º | Loader Dump Angle @ Full Height: 44º

Depth, Maximum 4,332 mm (14' 3") | Maximum Digging Depth with Bucket Leveled: 88 mm (3")

Capacities

Fuel Capacity 140.0 L (37.0 gal) | DEF Tank: 10.0 L (2.6 gal)

Oil capacity Hydraulic: 120.0 L (31.7 gal) | Engine: 8.5 L (2.2 gal) | Gearbox: 18.0 L (4.8 gal)

Cooling System 20.0 L (5.3 gal)

Weights

Weight Operating (Cab + Attachments): 8,040 kg (17,725 lbs) | Operating (Canopy + Attachments): 7,880 kg (17,372 lbs) | Operating (Cab, no attachments): 7,540 kg (16,623 lbs) | Operating (Canopy, no attachments): 7,360 kg (16,226 lbs)

2025 SANY® Backhoe Loader SLB95