2025 SANY® Forklift Trucks SCP160A-6

Information

2025 SANY® Forklift Trucks SCP160A-6

SANY’s SCP160A-6 is designed for lumber, pre-cast, steel, aluminum and breakbulk applications. For 35,000 lbs, it’s powerful yet nimble and has a small footprint allowing operators to work in tight yards. The robust 6.7L Cummins T4F engine delivers 164 hp at 2300 rpm, which pairs nicely with the Dana TE10 powershift transmission. Standard safety features include a reverse camera and radar detection sensors, dry chemical fire suppression, full LED work light package and lift override protection. This machine is easy for technicians to service boasting a powered tilting cab, onboard diagnostics and centralized grease points for the mast and steer axle. The intuitive display shows the load weight while the ergonomic joystick delivers precise hydraulic control for simplified operation. Backed by the industry’s strongest standard warranty at 3 years/6,000 hours.

Photos

Highlights

  • Essex Junction, Vermont
  • 2025
  • SANY®
  • Forklift Trucks SCP160A-6
  • QSB 6.7
  • Dana TE10
  • Available
  • 2,616 mm (103") | Fork: 200 mm (8") | Carriage: 2,520 mm (99") | Aisle width (with load length): 8,102 mm (319")
  • Mast Height Lowered: 3,545 mm (140") | Mast Height Extended: 5,380 mm (212") | Lift: 3,760 mm (148") | Cab: 3,510 mm (138")

Specifications

  • 2025
  • SANY®
  • Forklift Trucks
  • SCP160A-6
  • General
  • QSB 6.7
  • Cummins
  • EPA Tier 4 Final
  • Output-Rated: 122 kW (164 HP)
  • Governed: 2,300 rpm
  • 6
  • 6.7 L
  • Diesel
  • Drive Axle: Kessler D81
  • Dana TE10
  • Number of gears fwd/rev: 3/3
  • Wet disc
  • Dry disc
  • Pneumatic
  • 12.00-20 20PR
  • 12.00-20 20PR
  • Capacity: 24 V 120 Ah
  • AMPS: 120A (24V)
  • Travel with load: 25 km/h (15.5 mph) | Without load: 27 km/h (16.8 mph) | Lifting with load: 0.35 m/s (69 ft/min) | Without load: 0.40 m/s (79 ft/min) | Lowering with load: 0.50 m/s (98 ft/min) | Without load: 0.48 m/s (94 ft/min)
  • Drawbar pull-Max: 135 kN (30,350 lbf) | Gradeability @ 1 mph (1.6 km/h) with load: 33%
  • Load center: 610 mm (24") | Mast Tilt, Fwd (a)/Back (ß): 12º/15º | Load Distance: 891 mm (35") | Fork Thickness: 90 mm (3.5") | Fork Spread (in-in) Minimum: 86 mm (3.4") | Fork Spread (out-out) Maximum: 2,396 mm (94.3")
  • 3,300 mm (130")
  • Mast Height Lowered: 3,545 mm (140") | Mast Height Extended: 5,380 mm (212") | Lift: 3,760 mm (148") | Cab: 3,510 mm (138")
  • To Load Face: 4,970 mm (196") | Fork: 2,440 mm (96")
  • 2,616 mm (103") | Fork: 200 mm (8") | Carriage: 2,520 mm (99") | Aisle width (with load length): 8,102 mm (319")
  • Minimum: 300 mm (11.8")
  • 4,571 mm (180")
  • 16,000 kg (35,000 lbs)
  • Main: 180 L (48 gal)
  • 270 L (71 gal)
  • Axle Loading with Load: 32,900 kg (72,530 lbs) | Axle Loading without Load: 9,600 kg (21,160 lbs)
  • Axle Loading with Load: 2,600 kg (5,730 lbs) | Axle Loading without Load: 9,900 kg (21,830 lbs)
  • Turbocharger: Variable geometry
  • Total Truck Weight without Load: 19,300 kg (42,990 lbs)