Engine
						
							Rated Engine Speed
							Standard, on-board and adjustable speed from 200–520 RPM | governed to 2400 rpm
						
						
							Displacement
							36.8 cu-inch (603cc)
						
						
							Engine Power
							Kawasaki® 14.5 HP (10.8 kW) @3600 rpm
						
						
							Cylinder Liners
							twin-cylinder
						
						
							Engine Manufacturer
							Kawasaki®
						
						
							Cooling
							Air Cooled
						
						Fuel System
						
							Fuel Type
							Power Source: Hybrid
						
						Drivetrain
						
							Drivetrain
							Hybrid
						
						
							Drive System
							Traction Drive: 2WD | Traction Drive (System): Positive 2WD traction drive: Two, brushless permanent magnet traction motors coupled to a gearbox. (patent-pending).
						
						
							Drive Control
							Traction Pedal: Forward/Neutral/Reverse | Joystick: Raise/Lower | Function control switch: Neutral, Mow, Transport | Key switch; Steering Arm Lock Pedal; Brake pedal; Parking Brake; InfoCenter; Seat Adjusting Lever; Main Power Connectors; Choke; Fuel-Shutoff Valve
						
						
							Steering
							System Description: 48V electric steering motor with torque feedback device. Selective slow down feature for turning in mowing mode. Automatic slow down at high transport speeds when turning.
						
						Brakes
						
							Parking Brake
							Traction motor regenerative braking; foot pedal service/parking brake, linear-actuated automatic parking brake.
						
						Wheels & Tires
						
							Tires, Front Specification
							19" x 10.5" - 8", 4-ply, Smooth Tread
						
						
							Tires, Rear Specification
							19" x 10.5" - 8", 4-ply, Smooth Tread
						
						Battery
						
							Battery
							12V
						
						
							Battery Charging Time
							AC input voltage: 100-240VAC | AC input Frequency: 50/60 Hz | Max input Current: 14 A | Max: empty to full: 9 hrs.
						
						Electric
						
							Electrical
							System: 48V System for traction motor circuit, steering motor circuit, cutting unit motor circuit and lift / lower actuator circuit. 12V system for primary controls and brake actuator. 24V Safety System and autonomous control system. | Implement Drive: Three, 48V (1.1 KW), air-cooled brushless permanent magnet reel motors with separable controller.
						
						Operational
						
							Operating Speed
							Ground - Forward: Autonomous Mowing: 0-5 mph (0-8 km/h)  | Autonomous Transport 0-3.4 mph (0-5.5 km/h); Reverse disabled when in autonomous mode. | Mowing: 0-5 mph (0-8 km/h) | Transport: 0-10 mph (0-16 km/h) | Selective slow down feature for turning in mowing mode. Automatic slow down at high transport speeds when turning. | Ground - Reverse: 0 - 5 mph (0 - 8 km/h) Reverse disabled when in autonomous mode. | Mowing: 0 - 5 mph (0 - 8 km/h)
						
						Performance
						
							Noise Level
							Sound Power: 91 db(A) Sound Power at Operator's Ear: 73 db(A) Sound Power to Bystander: 25 ft – 78 db(A), 50 ft – 73 db(A), 100 ft – 66 db(A)
						
						Chassis
						
							Mainframe
							Three tie-down locations (2 side, 1 rear).
						
						Dimensions
						
							Dimensions
							Reel Diameter: 5 in. (12.7cm) | Turning Circle (Diameter): Minimum Turning Radius to machine center line, manual mode: 35.9" (91cm). Turning radius for autonomous mode: 47.2" (120cm)
						
						
							Height
							83" (211cm) | Cut Range: Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and roller/bedknife installed.
						
						
							Length
							Product: 98" (249 cm) with baskets
						
						
							Width
							Cut: 59" (150 cm)
						
						
							Overall Width
							73" (185cm)
						
						
							Ground Clearance
							3.8" (9.7cm)
						
						
							Wheelbase
							49.8" (126.5 cm)
						
						Capacities
						
							Fuel Capacity
							4.9 U.S. gal. (18.5 L)
						
						Weights
						
							Weight
							1,855 lbs (841 kg) (with 8-blade fairway cutting units)
						
						Features
						
							Features
							Bedknife: Replaceable single edged, EdgeMax™ Microcut Bedknife is standard on all cutting units. Aggressiveness stays constant throughout the life of the reel regardless of reel or bedknife wear. Patented design. | Bedknife Adjustment: Dual screw, indexed “click” adjustment to the reel; detents correspond to 0.0007" (0.018 mm) bedknife movement for each position. | Blade Style/Type: Reel | Blade Type (Description): Reels are 5" (13 cm) in diameter, 21" (53.3 cm) in length. EdgeSeries™ Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief ground. The reel weldment shaft is a 1.375" (35 mm) diameter tube with internally splined threaded insert. Two stainless steel ball bearings (30 mm inside diameter) slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut. | Cutting Unit Accessories: 8, 11, 14-Blade Cutting Unit, Roller Options, Roller Scrapers / Brushes / Combs Options, Bedknife and Bedbar Options, Tools and Maintenance Options. | Cutting Unit Lift/Lower: 48V electric linear actuators with fully integrated brushless permanent magnet motor and controller. Fully sealed with splash guard. Center lift actuator drop and raise delay is dependent on machine travel velocity. | Cutting Unit Type/Configuration: Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented) | Gauges/Instrumentation: Diagnostics: Advanced machine diagnostics available through the InfoCenter™. Additional autonomous and machine diagnostics available via the GeoLink Mow app. InfoCenter™: Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics, low oil pressure, alternator, engine hours, engine rpm, voltage, functional control status, parking brake status, reel speed setting, backlap control, clip control, calibration of 48V components, advanced machine diagnostics. | Grass Distribution: Non-adjustable front shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions. | Number of Blades: 11, 14, 8 | RDS™ System: Radius Dependent Speeds – Clip Rate: Maintains consistent cutting unit clip rate in turns on each individual reel (patent-pending). Wheel Speed Control: Individual wheel speed control during turns (patent-pending). | Reel/Cylinder Drive: Electric | Rollers: Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller. Rear: Steel full, 2" (5.1 cm) diameter with sealed bearings and through-shaft.