2025 Toro Groundsmaster® 3500 Series 3500-D (30807)
- Year 2025
- Make Toro
- Model Groundsmaster® 3500 Series
- Engine Kubota® 3-cylinder, liquid-cooled diesel.
2025 Toro Groundsmaster® 3500 Series 3500-D (30807)
The Groundsmaster® 3500 Series is a revolutionary triplex rotary mower designed for superior performance trimming. The free-floating Contour™ Plus cutting decks allow mowing of undulating terrain without scalping. The powerful engine and exclusive traction drive system, gets the mowing job done quickly.
Features may include:
Time Saving- Unlike any other mower on the market, the Groundsmaster® 3500-D allows you to be more productive. The 68" (173 cm) width-of-cut allows you to mow generous swaths, yet its compact size and the Sidewinder® system also allow you to make tight maneuvers in trim areas. Locations normally requiring two different machines can be handled by one.
- The unique Toro Series/Parallel™ traction drive system provides steady traction in all conditions, even in wet grass and over undulating terrain. Its full-time, 3-wheel drive system maintains power to two of the three wheels at all times, minimizing tire spinouts and scuffing.
- Sidewinder cutting units shift left and right a total of 24 inches (61 cm). This allows the tire tracks to be shifted within the mowing path to reduce wear on the turf.
- The Contour™ Plus cutting technology takes quality of cut to a whole new level. Air inlet pockets keep the grass standing tall for the cleanest possible cut, while an acceleration baffle speeds clipping circulation and assures maximum power. A unique directional vane and modified discharge opening deliver even clipping dispersion.
- The ground-following design of each Contour™ Plus free-floating deck permits mowing the most challenging berms without scalping. Two front rollers and a rear roller allow the deck to smoothly pass over turf.
Engine
							Cooling
							Liquid Cooled
						
						
							Engine
							Kubota® 3-cylinder, liquid-cooled diesel.
						
						
							Engine Power
							24.8 hp (18.5 kW)
						
						
							Cylinder Liners
							3-cylinder
						
						
							Displacement
							1123cc. EPA Tier IV Final and Stage V Compliant.
						
						Fuel System
							Fuel Type
							Fuel filter/water separator
						
						Drivetrain
							Drivetrain
							Diesel | Traction Drive: 3WD
						
						
							Steering
							Hydraulic power steering, tilt wheel
						
						
							Drive System
							3-wheel drive in mow and transport. Series/Parallel hydrostatic, closed-loop transmission provides infinitely variable ground speed in forward and reverse. Variable displacement piston type pump.
						
						Brakes
							Parking Brake
							Dynamic through hydrostatic transmission service brake. Hand actuated over center, drum type parking brake.
						
						Battery
							Battery
							12V
						
						Electric
							Electrical
							Cutting Unit Lift/Lower: Joystick control for deck raise and lower | System: 12-volt 585 CCA battery and 40 amp alternator
						
						Wheels & Tires
							Tires, Front Specification
							20" x 12" - 10", 4-ply, Turf Tread
						
						
							Tires, Rear Specification
							20" x 10" - 10", 4-ply, Turf Tread
						
						Operational
							Operating Speed
							Ground Speed - Forward: 0 - 9 mph (0 - 14 km/h) | Ground Speed - Reverse: 0 - 4 mph (0 - 6.4 km/h) | Mowing Speed: 0 - 6 mph (0 - 10 km/h)
						
						Chassis
							Frame Type
							Formed steel, welded steel and steel tubing
						
						Dimensions
							Length
							Product: 116" (295 cm)
						
						
							Height
							76" (193 cm) with ROPS | of Cut Range: 0.75" - 4" (1.9 cm - 10.2 cm) in 0.25" (0.6 cm) increments. 3-position 0.030" (0.08 cm) incremental calibration
						
						
							Width
							Transport: 72.5" (184 cm)
						
						
							Overall Width
							71.8” (182 cm) with standard 68” (173 cm) width of cut 75.8” (193 cm) width of cut
						
						
							Cutting Width
							68" (173 cm)
						
						Capacities
							Fuel Capacity
							11 U.S. gal. (41.6 L)
						
						Weights
							Weight
							2,110 lbs. (957 kg) with cutting units
						
						Features
							Features
							Blade Style/Type: Rotary | Number of Blades: 3
						
						
							Construction Material
							Cutting Unit Type/Configuration: Three Contour™ Plus 27" (69 cm), rear-discharge rotary with standard full-length striping rear rollers on each deck. Sidewinder® system allows all three decks to slide right and left 12" (30 cm) of center, 24" (61 cm) total travel. 68" (173 cm), standard Deck overhang for trimming is 12" (30.5 cm) @ 68" (173 cm) width of cut and 14" (35 cm) @ 72" (183 cm). Overlap: 6.5" (16.5 cm) at standard width of cut.
						
						
							Gauges
							Fuel gauge and hour meter. Light cluster with check engine and charge indicator lights. Low engine oil pressure and high coolant temperature warning lights (high temperature safety shut off).
						
					 
				 
					 
				 
						 
					